Hackensack, NJ · Commercial Kitchen Equipment
Traulsen Repair in Hackensack
Traulsen Specialist Service
Traulsen builds the heavy-duty end of commercial reach-in refrigeration — spec-grade coolers, freezers, roll-in cabinets and blast chillers trusted in high-volume kitchens, hospitals and hotels. Known for robust construction and the INTELA-TRAUL and TD9 microprocessor controls, Traulsen units are built for punishing duty cycles.
- Response
- Same-day / 24-7
- Rating
- 4.9★ (612 reviews)
- Warranty
- 90-Day Warranty
- Scope
- Commercial only
Serving Hackensack
Traulsen Specialist Service
The short answer
Traulsen Repair in Hackensack typically runs $250–$900 — the $95 diagnostic is credited toward the repair. Most jobs finish same-day in one visit with genuine OEM parts, backed by a 90-Day Parts & Labor Warranty. Call (914) 350-6776.
Traulsen equipment is chosen precisely because it runs in the hardest environments — banquet kitchens, hospital foodservice, high-volume production lines — where a cabinet may cycle continuously through a 16-hour day. That relentless duty makes proactive control monitoring and coil maintenance essential; a small sensor drift or airflow restriction that a light-duty box would shrug off can trip a Traulsen into an alarm state and threaten a full load. Our PM programs are built around that reality for Bergen County production kitchens.
Why Choose Us
- Traulsen-experienced commercial technicians who service restaurants, not homes
- Stocked service trucks carrying common compressors, gaskets, igniters, contactors and controls
- Same-day and 24/7 emergency dispatch — because a dead line stops service and spoils inventory
- NSF and health-code-aware repairs that keep you inspection-ready
- 90-day parts & labor warranty on every repair
- Straight quotes before work begins — no surprise invoices at month-end
Maintenance Tips
- Clean condenser coils on a strict schedule — Traulsen's tight sealed systems are unforgiving of restricted airflow
- Verify blast-chiller food probes against a calibrated reference periodically
- Address temperature alarms immediately rather than silencing them
- Service heavy door hinges and gaskets before the seal breaks
- Keep control-board connections clean and dry in wet-kitchen zones
- Review controller fault logs during routine PM visits
Quick facts
| Service | Traulsen Repair |
|---|---|
| Turnaround | Same-day in most cases |
| Diagnostic | $95 — credited to the repair |
| Warranty | 90-Day Parts & Labor Warranty |
| Most common fault | Diagnosed on site |
| Serving | Hackensack, Teaneck, Englewood, Paramus, Fort Lee & Bergen County |
What repairs cost
Straight pricing, no surprises.
These are typical all-in market ranges for parts and labor on commercial kitchen equipment across Hackensack and Bergen County. Your exact price is quoted on site after diagnosis — the $95 service call is credited toward the repair when you proceed.
| Repair | Typical range |
|---|---|
| Diagnostic / service call | $95–$165 |
| Reach-in / prep-table / undercounter repair | $250–$900 |
| Control board / electronics | $300–$950 |
| Door gasket / seal replacement | $150–$500 |
Ranges are estimates for reference, not a quote. Genuine OEM parts · 90-Day Parts & Labor Warranty.
How a visit goes
One specialist. One visit. Done right.
- 01
Call dispatch
Reach a real person at (914) 350-6776 — most Hackensack jobs get same-day or immediate emergency dispatch.
- 02
Stabilize & diagnose
We protect product at risk first, then test the actual failing part and circuit — not guess-and-swap — so the repair is right the first time.
- 03
Fix with parts on the truck
Common commercial compressors, fan motors, gaskets, igniters and controls ride with us, so most repairs finish in a single visit.
- 04
Verify & warranty
Every repair is verified, documented for your records, and backed by a 90-Day Parts & Labor Warranty.
Answers
Frequently asked questions
Our Traulsen is throwing a temperature alarm but the food still feels cold — is it real?
Traulsen's microprocessor alarms are usually pointing at something real — a drifting sensor, an early defrost fault, or slow recovery you can't feel yet. We pull the control's fault history, test the probes against a calibrated reference, and inspect the refrigeration loop. Treating an alarm as noise is how operators lose a full cabinet overnight, so we run it down properly.
Can you service a Traulsen blast chiller so it passes health-inspection cook-chill logs?
Yes. Blast chillers live or die on probe accuracy and cycle timing. We verify the food-probe reading against a calibrated instrument, confirm the chill cycle hits the required temperature drop in the required time, and document it — so your HACCP and inspection records hold up.
The freezer door on our Traulsen keeps sweating and sticking — normal?
No. Sweating and sticking on a freezer door usually means a failed anti-sweat door heater or a worn/compressed gasket, and both get worse fast. We test the heater circuit, replace the gasket if the seal is broken, and service the hinges so the door closes clean — protecting the coil from icing.
How quickly can you respond if a roll-in cabinet fails before a banquet?
Event and banquet failures are exactly what our emergency dispatch is for. We prioritize product-at-risk calls, carry common Traulsen fan motors, gaskets and controls, and will get the cabinet holding safe temperature first, then complete the full repair with a firm quote.
Verified reviews
Rated 4.9★ by Hackensack operators
612 verified reviews
“Outstanding Traulsen repair service! The technician was very knowledgeable about Traulsen appliances and fixed our reach-in refrigerators quickly. Highly recommended!”
“Freezer alarm at 11pm on a holiday weekend. I expected voicemail. Instead a real person answered, walked me through protecting the product, and had a tech out. Turned out to be a defrost fault icing the coil. Fixed and holding by 2am. I can't overstate how much that saved us.”
“We run a cook-chill program and our Traulsen blast chiller wasn't hitting cycle. They verified the food probe against a calibrated reference, corrected the cycle, and documented it so our HACCP records hold up. Exactly the expertise we needed.”
“Our walk-in cooler started warming up on a Saturday night with the box full of prep for a catering job. I called and a tech was here within the hour, got it holding temperature to protect the product, then found and fixed a bad condenser fan and contactor. They saved us thousands in inventory. This is who we call now.”
Across Hackensack, Teaneck, Englewood, Paramus, Fort Lee and the wider Bergen County area, Hackensack Commercial Appliance Repair is the team restaurants and commercial kitchens call when traulsen repair needs a commercial specialist rather than a generalist. We diagnose the actual fault — not guess-and-swap — carry common OEM parts on the truck for most Hackensack visits, and back every repair with a 90-Day Parts & Labor Warranty. In a working kitchen, downtime is lost revenue and inventory at risk, so we also flag the wear that leads to repeat failures before it strands you mid-service. Call (914) 350-6776 for same-day and 24/7 emergency service.
4.9★ · Hackensack & Bergen County · 24/7
Need Traulsen Repair in Hackensack?
Call (914) 350-6776 for same-day service in Hackensack.